Buy that special someone an AP Physics prep book! The 2025 edition will come out on Oct. 15, 2024, and is 100% aligned with the new course and exam description, including new practice exams: 5 Steps to a 5 AP Physics 1

Visit Burrito Girl's handmade ceramics shop, The Muddy Rabbit: Mugs, vases, bowls, tea bowls...

17 September 2009

An equilibrium quiz


Here's a classic question for the end of the equilibrium unit. I say "classic" because although I got the picture from Giancoli's text, I first encountered the question in Dave Ledden's physics class when I was a senior in high school.

A bear sling, as shown above, is used in some national parks for placing backpackers’ food out of reach of the federal bears. Is it possible to pull the rope hard enough so that it doesn’t sag at all? (Obviously, justify your answer in a couple of sentences… just “yes” or “no” doesn’t cut it :-) )


A good explanation points out that with no sag, no upward force would counteract the bag's weight; thus the bag would not be in equilibrium, and the bag must fall. An even better explanation would explain that the vertical components of the rope's tension provide the upward force to counteract the bag's weight; in order for vertical components of tension to exist, the rope must pull somewhat upward, and so must sag.

An outstanding explanation shows that the vertical components are each Tsinθ, where θ is the angle of the rope measured from the horizontal. If the rope approaches purely horizontal, the angle goes to zero. The vertical equilibrium statement is 2(Tsinθ) = mg. As θ goes to zero, sin θ also goes to zero... meaning that the equilibrium statement for a horizontal rope is mg=0. Impossible!

4 comments:

  1. Another equally appealing explanation (as you know, but might have thought to keep aside) would be as follows:
    To keep the rope horizontal and to produce an upward balancing force (which is the resultant of the tensions), the tension T has to be infinite, which is impossible.
    With best wishes,
    MV

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. is there an answer for representing forces

    ReplyDelete
  4. Khaled and king, take a look at the last paragraph... it gives the best sort of answer that I would expect from my students.

    ReplyDelete